# gpg-remailer

## gpg-remailer.3.01.03.tar.gz

## 2006-2015

#

gpg-remailer(1)

# gpg-remailer(1)

## gpg-remailer.3.01.03.tar.gz gpg-remailer - reencrypt PGP/GPG maill

## 2006-2015

## NAME

gpg-remailer - forward re-encrypted/signed PGP/GPG encrypted/signed mail to a group

## SYNOPSIS

gpg-remailer [OPTIONS]

## DESCRIPTION

Gpg-remailer decrypts received PGP/GPG messages, verifies the received signature, and re-encrypts the e-mail for a well defined group of recipients. Gpg-remailer can also be configured so as to process clear-text e-mail.

Using gpg-remailer the list of members of a group of people who want to exchange encrypted and authenticated e-mails (and maybe also clear-text messages) can be maintained at one location, allowing the members of the group to specify just one e-mail address to send PGP/GPG signed and encrypted (or optionally clear-text) e-mail to.

Gpg-remailer reads incoming e-mail from its standard input stream.

If the incoming e-mail is clear-text, it resends the e-mail to one or more configurable e-mail addresses.

If the incoming e-mail is PGP/GPG encrypted (and optionally signed) it re-encrypts the received information for every member of a configurable group, and send the re-encrypted information to one or more configurable e-mail addresses.

By itself, gpg-remailer is not a mailing list. However, the configured recipient address could be, e.g., a mailing list address, for further distribution of the processed e-mail. Gpg-remailer is a remailer: it uses the message's data, but not its headers. Having received an e-mail it resends, rather than forwards, the received e-mail. The e-mail that is received via gpg-remailer therefore contains a completely new set of e-mail headers.

A configuration file as well as command line options can be used to fine-tune gpg-remailer's behavior.

## RETURN VALUE

Gpg-remailer always returns 0 to the operating system to prevent unknown mailer error messages in the MTA's logs. However, when gpg-remailer ends prematurely an error message is written to the standard error stream.

## REQUIREMENTS

In order to use gpg-remailer the following requirements must be met (all commands should be issued by the root user):

- Since multiple groups may use gpg-remailer it is advised to define functional accounts handling e-mail to be processed by gpg-remailer. A functional account secmail can be defined using a command like this:

          adduser --home /var/lib/secmail --disabled-password secmail

- All locations used by the gpg-remailer must be given highly restrictive permissions. E.g., the functional accounts should set umask 077. It is the responsibility of the user to make sure that the access rights are correctly configured.

- Consider making all functional gpg-remailer accounts members of a special group (e.g., gpg-remailer) and allow execution of /usr/sbin/gpg-remailer only my members of that group:

          addgroup gpg-remailer
          adduser secmail gpg-remailer
          chown root.gpg-remailer /usr/sbin/gpg-remailer
          chmod o-rx /usr/bin/gpg-remailer

- To allow the functional account to handle incoming e-mail sudo(1) can be used. In the file /etc/sudoers the following lines can be entered (REMAILERS can be given a comma separated list of functional account names, mailhost.org should be replaced by the name of the host handling incoming e-mail):

      Runas_Alias REMAILERS = secmail

      mail    mailhost.org=(REMAILERS) NOPASSWD:  /usr/sbin/gpg-remailer

  E.g., if gpg-remailer runs on a computer named remailer.mydomain.nl which may receive incoming e-mails, then specify remailer.mydomain.nl for mailhost.org.

- An e-mail address must be defined to where the mail to reencrypt must be sent to. This e-mail address must be known by the members of the group who want to use the gpg-remailer. Such an account could be, e.g., secmail@mailhost.org, appearing as a defined mail address in, e.g., /etc/mail/aliases. The address for this example would be entered in the /etc/mail/aliases file (some installations use /etc/aliases) in this way:

          secmail:         "|sudo -u secmail /usr/sbin/gpg-remailer"

## THE PSEUDO USER'S PGP KEY RINGS

- The functional account must be provided with a GPG/PGP keypair. Its public key must be distributed over the people who are allowed to send mail to the gpg-remailer (which may be the world if the public key is published at a PGP key server). Since the gpg-remailer must be able to act on its own, the secret key must not require a passphrase. The key can be created as follows (after the initial command, which is specified by root, the remaining commands through the final exit command at the end of this section are executed by the pseudo-user secmail):

          su - secmail

          gpg --gen-key

  At the gpg --gen-key command the gpg program asks for some details. Accept the defaults unless you have reason not to, but make sure you do not require a pass-phrase: press Enter twice when asked for one.

Some additional suggestions:

- Details for defining a PGP key without password:

  define default RSA key, size 2048, never to expire
  real name: secmail gpg-remailer functional account
  email address: secmail@mailhost.org
  No passphrase required: press Enter twice.

- Specify the key-id of the just created gpg-key as the default key in the file ~/.gnupg/gpg.conf (or ~/.gnupg/options, whichever is used). E.g.,

      default-key 1234ABCD

- Also add a line containing

      force-mdc

  to ~/.gnupg/gpg.conf. This prevents the warning

      WARNING: message was not integrity protected

- If you want to allow non-group members to send e-mail to the gpg-remailer consider adding a key server specification to ~/.gnupg/gpg.conf as well, to allow the automatic retrieval of missing public keys. E.g., add a line like

      keyserver keys.gnupg.net

  to ~/.gnupg/gpg.conf.

- Next use gpg --search-keys, gpg --recv-keys or gpg --import (see the gpg(1) man-page for the required formats of these commands) to already add the public keys of all the members of the group who will be using gpg-remailer to the pseudo user's public key ring.

- If a group member exists who has signed the GPG/PGP keys of all other members, then consider to trust this member fully, to prevent warnings resulting from using untrusted keys.

- Once the gpg-remailer's GPG key pair has been created, provide the remailer's public key to the members of the group. These members should import the public key and they should be advised to sign the remailer's public key to prevent warnings about using an unverified public key. The remailer's public key can be be exported to file using

          gpg --armor --export secmail > secmail.pub

  and the members of the group can import the remailer's public key using:

          gpg --import secmail.pub

- When a new member is added to the group he/she should add the remailer's public key to his/her public key ring and provide his/her public key for import into the functional account's public key ring.

- Gpg-remailer requires the existence of a configuration file and of a directory to store its temporary files in. See the section CONFIGURATION FILE below.

- Having prepared the pseudo user's PGP key rings, the command exit takes you back to the root user's session.

## OPTIONS

If available, single letter options are listed between parentheses following their associated long-option variants. Single letter options require arguments if their associated long options require arguments as well.

- --debug (-d)
  When specified, debug messages are logged to the log-file (see below). When this option is specified the files written by gpg-remailer are not removed after gpg-remailer has processed an incoming e-mail.

- --help (-h)
  A short summary of the usage is displayed to the standard output after which gpg-remailer terminates.

- --logfile=filename (-l)
  Specifies the file on which gpg-remailer's log messages are written (by default ~/etc/gpg-remailer.log).

- --loglevel=level (-L)
  LogLevel 0 provides extensive debug output as well as all other logmessages;
  LogLevel 1 logs the executed commands and the default messages;
  LogLevel 2 logs the default messages (characteristics of incoming and outgoing e-mail) (default);
  Higher levels will suppress logging.

- --member=PGP e-mail address (-m)
  The PGP-key e-mail address to re-encrypt the message for. Overrides the member(s) listed in the configuration file. This option may be specified multiple times when multiple members must be specified on the command line. With each --member option only provide one e-mail address (e.g., member@domain.iso. This format is not checked by gpg-remailer, but a failure to comply may result in gpg-remailer being unable to re-encrypt or e-mail messages. The --member specifications can also be used to specify a set of e-mail envelope addresses from where clear-text e-mail is accepted, using the envelope: members and clear-text: envelope configuration file specifications.

- --noMail
  When specified no mail is sent.

- --nr=file-number (-n)
  Files created by the gpg-remailer while processing incoming e-mails are kept, and receive suffix file-number, which should be a number.

- --recipient=e-mail address (-r)
  The recipient address(es) of the (re-encrypted or plain) resent e-mail. Overrides the recipient(s) listed in the configuration file. As with the --members option, multiple recipients may be specified by providing multiple --recipient options. These addresses may or may not be unique. If multiple identical addresses are specified gpg-remailer will send e-mail to each of these multiply specified addresses.

  Each --recipient option should normally only define one plain e-mail address (e.g., recipient@domain.iso, but multiple --recipient options are also accepted. The format of the e-mail addresses is not checked by gpg-remailer, but providing any information in addition to or differing from a plain e-mail address may result in gpg-remailer being unable to re-encrypt or resend e-mail messages.

  In addition to plain e-mail addresses, the specification --recipient members can be used to indicate that the re-encrypted mail must be sent to all e-mail addresses specified using member specifications.

- --step=name
  Perform the indicated step of the remailing process. Step names are:

  hdrs (write the mail headers),
  org (write the mail data),
  dec (only for PGP encrypted e-mail: write the decrypted info),
  doc (only for PGP encrypted e-mail: create the info to send),
  enc (only for PGP encrypted e-mail: encrypt the info to send),
  clearmail (send clear-text mail),
  clearmail:address (send mail only to the provided address, ignore recipient(s) specified otherwise). pgpmail (send pgp-encrypted mail),
  pgpmail:address (send pgp-encrypted mail only to the provided address, ignore recipient(s) specified otherwise).

  Step hdrs is completely optional. Later steps depend on earlier steps. E.g., --step doc can only be requested after having specified --step dec in a previous run.

  With clear-text e-mail steps dec, doc, enc and pgpmail should not be provided.

  With PGP encrypted mail step clearmail should not be provided.

- --tmp=path (-t)
  The path of the directory where the temporary files are written (by default: $HOME/tmp). This should be an absolute path.

- --umask=octalValue
  By default, gpg-remailer uses umask 077 for all files it creates: only the pseudo-user has read and write permissions. In normal circumstances there should be no reason for changing this umask value, but if necessary the --umask option can be used, providing an octal value, to specify an alternative umask value.

- --version (-v)
  Gpg-remailer's version number is is written to the standard output stream after which gpg-remailer terminates. )

  ## CONFGURATION FILE

  The default configuration file is ~/etc/gpg-remailer.rc under the pseudo user's home directory. Its path may be altered using a program option.

  Empty lines are ignored. Information at and beyond #-characters is interpreted as comment and is ignored as well.

  All directives in the configuration file obey the pattern

          directive: value

  A line may at most contain one directive, but white space (including comment at the end of the line) is OK. Several directives may be specified multiple times; otherwise the first occurrence of a directive is used. All directives are interpreted case insensitively, but their values are used as specified. E.g., DeBUG: true is as good as debug: true, but debug: TRUE is not recognized. Non-empty lines not starting with a recognized directive are silently ignored.

  The following directives are supported (default values are shown between parentheses; when none is specified there is no default). When equivalent command line options are used then they overrule the configuration file specifications.

  - debug: logic (false)
    When logic is specified as true debug messages will be logged to the log-file (see below). Command line options: --debug, -d. When this option is specified the files written by gpg-remailer will not be removed when gpg-remailer terminates.

  - clear-text: specification (rejected)
    By default, the gpg-remailer does not accept clear-text e-mail. This can explicitly be indicated in the configuration file using the

    clear-text: rejected

    specification. If clear-text e-mail should be allowed specify

    clear-text: accepted

    It is also possible to specify the envelope addresses that are accepted for received clear-text e-mail. If this is required, specify

    clear-text: envelope

    and define the accepted envelope e-mail addresses using the envelope: configuration option.

  - envelope: e-mail address
    The envelope specifications are only interpreted when clear-text: envelope has been specified. When clear-text: envelope was specified only clear-text e-mail using one of the configured envelope addresses will be re-mailed to the configured recipients. The special envelope specification

    envelope: members

    may be used to indicate that envelope addresses which are equal to the addresses specified using member specifications are all accepted.

    All envelope addresses are interpreted case-insensitively. By default (if no envelope specification has been provided) all envelope addresses are accepted, in which case the specification clear-text: envelope reduces to clear-text: accepted.

  - keepFiles: nr
    When a number is specified all files written by gpg-remailer use the specified number and are not removed when gpg-remailer terminates. When this option is not specified the files receive a random numeric extension resulting in the creation of new, as yet non-existing *.<nr> files.

  - logfile: filename (etc/gpg-remailer.log)
    The file on which gpg-remailer's log messages are written.

  - loglevel: value (2)
    LogLevel 0 provides extensive debug output as well as all other logmessages;
    LogLevel 1 logs the executed commands and the default messages;
    LogLevel 2 logs the default messages (characteristics of incoming and outgoing e-mail);
    With higher levels logging is suppressed.

  - member: address
    Multiple members may be specified. Each member specification specifies a PGP-key e-mail address to re-encrypt the message for. The addresses should be plain e-mail addresses (e.g., member@domain.iso), and should not contain other elements (like the name of the person using the address). This format is not checked by gpg-remailer, but a failure to comply may result in gpg-remailer being unable to re-encrypt or e-mail messages. The member specifications can also be used to specify a set of e-mail envelope addresses from where clear-text e-mail is accepted, using the envelope: members and clear-text: envelope specifications.

  - noMail: logic (false)
    When specified as true no mail is sent.

  - recipient: e-mail address
    The recipient address(es) of the (re-encrypted or plain) resent e-mail. Multiple recipients may be specified. These addresses may or may not be unique. If multiple identical addresses are specified gpg-remailer will send e-mail to each of these multiply specified addresses. Recipients should be specified using plain e-mail addresses (e.g., destination@some.host.org). The re-encrypted mail is sent to each recipient in turn. The specification

    recipient: members

    can be used to indicate that the re-encrypted mail must be sent to all e-mail addresses specified using member specifications.

  - replyTo: full address
    The reply to address may be any e-mail reply-to address. The reply-to becomes the default reply address for the recipient receiving gpg-remailer's e-mail message. Quotes and double quotes are removed from the reply to address. A reply-to specification could be, e.g.,

            SECMAIL signed AND encrypted <secmail@mailhost.org>

    This specification should be according to the requirements defined in RFC 822: Standard for ARPA Internet Text Messages. Failing to comply with RFC 822 may result in the e-mail sending program rejecting the e-mail that is submitted by the gpg-remailer.

  - signature: requirement (required)
    This option is used to control signature checking. Recognized values are:
    none (or not specified): no signature checking is performed;
    required: a PGP signature must have been provided;
    good: the PGP signature must be recognized as a a `good signature'.

  - tmp directory (tmp/)
    The directory into which gpg-remailer writes its temporary files.
  )

  ## FORMATS

  Although using PGP/GPG in e-mail is established technology, various formats of the e-mail are possible. Currently gpg-remailer recognizes the following formats:

  - Simple encrypted messages, consisting of an encrypted e-mail body;
  - Multi-part encrypted messages;
  - Encrypted messages containing detached signatures.

  Below a description is given of the actual contents of PGP encrypted en decrypted files.

  All PGP encrypted e-mail shows the following headers (the boundary values will differ over different e-mail messages):

      Content-Type: multipart/encrypted; protocol="application/pgp-encrypted";
              boundary="+QahgC5+KEYLbs62"
      Content-Disposition: inline

  All PGP encrypted e-mail shows the following organization (the lines are used to separate the e-mail organization from the text of this man-page and are not actually present in the e-mail or in the decrypted information; empty lines, where shown, are required):

      ----------------------------------------------------------------------
          mail headers

      --+QahgC5+KEYLbs62
      Content-Type: application/pgp-encrypted
      Content-Disposition: attachment

      Version: 1

      --+QahgC5+KEYLbs62
      Content-Type: application/octet-stream
      Content-Disposition: inline; filename="msg.asc"

      -----BEGIN PGP MESSAGE-----
      ...
      -----END PGP MESSAGE-----

      --+QahgC5+KEYLbs62--
      ----------------------------------------------------------------------

  Note that boundaries consist of
  - a new line character
  - two dashes followed by the boundary text
  - the last boundary is followed by two dashes
  - a new line character

  The various PGP encrypted e-mail formats differ in the way they organize the decrypted information.

  Simple Encrypted Messages.

  During decryption the signature is verified, and the result of the verification is written to the standard error stream. The decrypted message itself contains but one message, organized as follows:

      ----------------------------------------------------------------------
      Content-Type: text/plain; charset=us-ascii
      Content-Disposition: inline
      Content-Transfer-Encoding: quoted-printable

      decrypted text of the message
      ----------------------------------------------------------------------

  Multi-part Encrypted Messages.

  During decryption the signature is verified, and the result of the verification is written to the standard error stream. The decrypted message itself contains multiple messages, organized as follows:

      ----------------------------------------------------------------------
      Content-Type: multipart/mixed; boundary="f+W+jCU1fRNres8c"
      Content-Disposition: inline

      --f+W+jCU1fRNres8c
      Content-Type: text/plain; charset=us-ascii
      Content-Disposition: inline
      Content-Transfer-Encoding: quoted-printable

      Text of the first attachment

      --f+W+jCU1fRNres8c
      Content-Type: application/pdf
      Content-Disposition: attachment; filename="attachment.pdf"
      Content-Transfer-Encoding: base64

      text of the attachment.pdf in base64 encoding

      --f+W+jCU1fRNres8c--
      ----------------------------------------------------------------------

  Multiple attachments might follow in the same way.

  Encrypted Messages Containing Detached Signatures.

  During decryption the signature is not verified (but the recipient(s) is (are) shown) and the decrypted file is organized as follows:

      ----------------------------------------------------------------------
      Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature";
              boundary="=-TNwuMvq+TfajHhvqBuO7"

      --=-TNwuMvq+TfajHhvqBuO7
      Content-Type: text/plain
      Content-Transfer-Encoding: quoted-printable

      Text of the message

      --=-TNwuMvq+TfajHhvqBuO7
      Content-Type: application/pgp-signature; name=signature.asc
      Content-Description: This is a digitally signed message part

      -----BEGIN PGP SIGNATURE-----
      ... signature text
      -----END PGP SIGNATURE-----

      --=-TNwuMvq+TfajHhvqBuO7--
      ----------------------------------------------------------------------

  The last part represents the detached signature, The contents section must be separated from the decrypted file (named, e.g., decrypted) (creating, e.g., the file contents). That latter file's signature may then be verified using the command

          gpg --verify decrypted contents

  resulting in the signature verification written to the standard error (as usual). The contents start immediately following the first boundary, and continues up to, but not including, the new line just before the next boundary.

## FILES

Default locations are shown. Configuration options may change these locations.

- /etc/mail/aliases: defines the mail accounts used by gpg-remailer.
- etc/gpg-remailer.rc: gpg-remailer's configuration file.
- /etc/sudoers: defines actions executed by the MTA.

- tmp/decrypted.<nr>: the decrypted original text.
- tmp/err.<nr>: a file containing errors generated when processing the original text. The tmp/signature.<nr> may contain gog-decryption errors.
- tmp/hdrs.<nr>: the headers of the received e-mail.
- tmp/mail.<nr>: the mail sent to the recipient(s).
- tmp/org.<nr>: a copy of the received e-mail. When random file numbers are used a org.<nr> file will not overwrite an existing org.* file.
- tmp/reencrypt.<nr>: the (as yet unencrypted) file to return to the the recipient(s).
- tmp/reencrypted.<nr>: the reencrypted file to return to the the recipient(s).
- tmp/signature.<nr>: the signature found in the original text.

## SEE ALSO

addgroup(1), adduser(1), chmod(1), chown(1), gpg(1), sudo(1), umask(1),

## BUGS

None reported

## AUTHOR

Frank B. Brokken (f.b.brokken@rug.nl).